Ground-Source Heat Pump (Brine-to-Water) with Deep Boreholes
Ground-Source Heat Pump (Brine-to-Water) with Deep Boreholes
Description of the Innovation
A brine-to-water heat pump uses energy stored in the ground, drawing on it through deep boreholes. Using a closed primary circuit, it extracts low-temperature heat from the ground and uses it for space heating, hot water or cooling. The technology is a renewable energy source and is one of the solutions for decarbonising buildings that need heat all year round.
Trend Alignment
The innovation is in line with the trends of decarbonisation, the electrification of heating and greater energy efficiency in buildings. It responds to the European Commission’s goals of reducing fossil fuel consumption, developing renewable energy sources and cutting greenhouse gas emissions. It also responds to the requirements of the EPBD (Energy Performance of Buildings Directive), the EED (Energy Efficiency Directive) and the REPowerEU initiative.
Relevance in the Olomouc Region Context
The solution is especially suitable for buildings with a long-term, stable heat demand, such as schools, healthcare facilities, administrative buildings and social services facilities. Because the technology is efficient and long-lasting, it helps reduce operating costs over the long term and lowers the greenhouse gas emissions from running buildings.
In practice, larger public buildings use a bivalent configuration, in which the ground-source heat pumps are supplemented by a backup heat source, most often a gas condensing boiler. This keeps the building running reliably, covers peak demand and maintains the heat supply during servicing or other exceptional situations. This backup also makes it possible to optimise the size of the borehole field and the heat pump’s output.
Technological Basis
The system consists of deep boreholes with a closed pipe circuit, a heat pump, heat storage, control components and the building’s related systems. A heat transfer fluid (usually an antifreeze mixture based on propylene glycol) circulates in the boreholes and carries energy to the heat pump. Current systems use closed circuits designed to protect groundwater and minimise the environmental risks of operating the technology.
Technical Parameters
The seasonal coefficient of performance (SCOP) of brine-to-water systems usually ranges from 4 to 5.5. Boreholes are typically 80 to 200 metres deep, depending on the building’s energy needs and local geological conditions. One frequently cited advantage of the technology is its long lifespan: boreholes commonly last more than 50 years. According to available sources, the heat pump itself lasts 20 to 25 years.
Costs
Purchase costs are higher than for conventional heating sources, mainly because of drilling the boreholes and the related design work. The final investment depends on geological conditions, the size of the building and the required system output.
Limitations and Barriers
Current barriers include the need for a geological and hydrogeological assessment of the site, the subsequent permitting procedures and higher investment costs. In some locations, water source protection zones or unsuitable geological conditions may limit the use of the technology.
One risk is incorrect sizing of the boreholes or underestimating the building’s energy needs, which can reduce both efficiency and cost-effectiveness. The system’s reliability also depends on the electricity supply.
Future Direction
Further development is moving towards integration with PV plants, battery storage, building energy management systems and community energy. The technology is expected to become even more important as European legislation requires buildings to cut their emissions and energy consumption.
Prepared by ICOK, 2026